Ai SolventVap 2L Rotary Evaporator, Turnkey, with Ai C15-3 Chiller and Ai WaterVac Pump
SKU Description Quantity Price Add to Cart
SE05-C15-WV07 Ai SolventVap 2L Rotary Evaporator, Turnkey, with Ai C15-3 Chiller and Ai WaterVac Pump 1 Kit
  • 1
  • 2
  • 3
  • 4
  • 5


The Ai SolventVap 0.5-gallon/2L (evaporating flask capacity) series rotary evaporators come with a modular heating bath, vertical glassware, and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely efficiently. That’s why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap is the safety features, which includes dry-run protection, water bath over-temperature shut-off protection, and fuse protection.

Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.

Digital water bath operates from ambient temperature to 99°C (210°F) with PID temperature control stepping at 0.1°C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power, should the controller fail.

Standard Glassware Set 0.13 gallon (0.5L), 0.26 gallon (1L) or 0.53 gallon (2 liters) pear shaped evaporating flask, 0.26 gallon (1 liter) round-bottomed receiving flask, and vertical condenser. Rotary evaporators with vertical glass condenser are great for distillation of solvents with higher boiling points.


  • Solvent-resistant PTFE and Viton gaskets ensuring long time operation.
  • Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation.
  • Downward-condensing vacuum connection design ensures safe vacuum operation.
  • Modular design (individual rotary and water bath modules) for easy future upgrades.
  • Easy multi-level manual lift with secure lock for the evaporating flask.
  • Easy, straight-forward visual operation with digital speed and temperature display.
  • PID temperature controller ensures accurate temperature control is maintained.

Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.


Electrical requirements 110V 60Hz single phase, 9.8A, 1075 watts (heater: 1050 watts, rotation motor: 25 watts)
Evaporating Flask Capacity 0.13 gallon (0.5L), 0.26 gallon (1L) or 0.53 gallon (2L)
Evaporating Flask Maximum Load Not to exceed 60% of the flask's capacity
Evaporating Flask Rotation Speed 10 to 180 rpm
Evaporating Flask Evaporating Speed 20 ml per minute
Evaporating Flask Lifting weight balancing manual control with lock
Evaporating Flask Max Lifting Distance 4 inches (extendable to 10 inches)
Receiving Flask 0.26 gallon (1L)
Condenser Glassware Vertical with dual-spiral glass tubing
Condenser Chilling Fluid Connection 3/8" hose barb x 2
Condenser Vacuum Connection 3/8" hose barb x 1
Condenser Condensing Surface 1,260 cm2 or 1.4 sq ft
Working Environment 5 to 95°F
Water Bath Max Temp 99°C (210°F)
Water Bath Temp Controller digital
Water Bath Capacity 2 gallons
Water Bath Material stainless steel
Water Bath Dimensions 10" diameter x 5" depth x 9.75" height
Water Bath Media distilled water only
Water Bath Max Water Level not to exceed 1" from the top rim of the bath
Water Bath Number of Heaters one
Vacuum Connection 3/8" hose barb x 1 (on condenser)
Vacuum Sealing PTFE + Viton gaskets
Ultimate Vacuum < 3 torrs
Safety Dry-run, over-temp shut-off, fuse protections
Weight & Dimensions 21lbs unit (40lbs shipping) / 22 x 12.5 x 26" unit (26 x 21 x 29" shipping) WxDxH
Warranty One year warranty on rotary evaporator except glassware and all sealing gaskets.
Glassware may have minute blemishes that will not affect the function.
​ ​ ​
Part Description Quantity
Ai 110V C15-3 -15°C/5°F compact recirculating chiller and accessories 1 each
Ai 110V WaterVac 0.7 cfm 735 torr 2-head recirculating water pump 1 each
Premium food grade silicone vacuum hose 6 ft
110V evaporator body 1 each
110V water bath 1 each
Vertical condenser with 2 chilling water ports and 1 vacuum port, glass 1 each
2L pear shaped evaporating flask, glass 1 each
1L round shaped receiving flask, glass 1 each
Glass vapor duct with seal 1 each
Glass material feeding tube with valve & PTFE extension hose 1 each
PTFE vacuum sealing kit 1 set
Condenser cap kit 2 pieces
Glass shaft cap and evaporator flask quick-release 2 pieces
Condenser support and bracket 1 each
Condenser support securing screw 1 each
Receiving flask ball joint clamp 1 each
GL14 connector 3 each
3-prong 110V US power cord for evaporator 1 each
Silicone vacuum tubing 10 ft
Mechanical vacuum gauge 1 each
User's manual 1 each

Related Products