Ai SolventVap 50L Rotary Evaporator, Turnkey, with Ai Chiller and Welch Pump

from $30,870.00 $28,432.00

SKU DESCRIPTION ELECTRICAL QUANTITY PRICE ADD TO CART
SE130-S2 Ai SolventVap TurnKey 50L Rotary Evaporator with Ai Chiller and Welch Pump 220V, 50/60Hz, 9A, 6400 watts 1 Kit
$30,870
$28,432

Efficiency is key

The new Ai SolventVap 13-gallon/50L/1.8 cu ft (evaporating flask capacity) series of rotary evaporators ships with vertical glassware and digital temperature/rotation control. The optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely efficiently.

This efficiency is why SolventVap evaporators consistently deliver reliable and reproducible process results typically reserved for more costly systems.

Safety is paramount

The SolventVap's safety features include dry-run protection, fuse protection, and water bath over-temperature shutoff protection.

An advanced rotovap

The Ai SolventVap rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath.

The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient.

Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows the solvent to be continuously drawn into the rotating flask without needing to stop the operation.

German-engineered water bath

The German-engineered Julabo FL7006 digital water bath operates from ambient temperature to 99°C (210°F). Its PID temperature control steps at 0.1°C increments. Heating coils are located directly inside the pan for the most efficient heating possible. Should the controller fail, a built-in overheat protector will shut down power.

The Standard Glassware Set includes a 13.2 gallon (50 liters) round-bottomed evaporating flask, a 5.28 gallon (20 liters) round-bottomed receiving flask, and a vertical condenser. Vertical glass condensers are ideal for the distillation of solvents with higher boiling points.

Additional features

  • The SolventVap includes a stainless steel 50L evaporating flask carrier with silicone cushions (a $399 value), custom made for the Ai 50L SolventVap series rotary evaporators. This carrier can be placed on top of our 50L SolventVap's water bath for easy loading and unloading. It can even be used as a flask stand.
  • The swivel casters can be adjusted to allow the rotovap to stand securely, even on an uneven floor.
  • Solvent-resistant PTFE and Viton gaskets ensure enduring operation.
  • Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation.
  • Downward-condensing vacuum connection design ensures safe vacuum operation.
  • Motorized water bath lifting for precise control.
  • Additional manual water bath lift provides you peace of mind in case of power failure.
  • Easy, straight-forward visual operation with digital speed and temperature display.
  • PID temperature controller ensures accurate temperature control is maintained.
  • One year warranty on rotary evaporator (doesn't include glassware or sealing gaskets).

Warning

Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure.

Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

In-depth specifications

Specification SE130-S2 Rotary Evaporator with Ai Chiller and Welch Pump
Electrical requirements 220V 50/60Hz single phase, 29A, 6400 watts (rotation speed: 400 watts)
Glass material High borosilicate glass 3.3
Evaporating flask capacity 13.2 gallon (50 liters or 1.8 cu ft)
Evaporating flask max load Not to exceed 60% of the flask's capacity
Evaporating flask sealing flange 4.9" diameter
Evaporating flask rotation speed 10 to 110 rpm
Evaporating flask evaporating speed 2 gallon/hour (water), 4 gallon/hour (alcohol)
Receiving flask capacity 5.28 gallon (20 liters or 0.7 cu ft)
Condenser glassware Main + auxiliary triple-circulating cold traps, vertical
Condenser chilling fludi connection 3/8" hose barb x 4 (2 on main + 2 on auxiliary)
Condensing surface, main condenser 11,500 cm2 or 12.4 sq ft
Condensing surface, auxiliary condenser 4,000 cm2 or 4.3 sq ft
Working environment 5 to 95°F
Water bath temperature range ambient to 99°C (210°F)
Water bath temperature controller digital
Water bath dimensions 22.1" diameter x 12.2" depth
Water bath material stainless steel
Water bath media distilled water only
Water bath max water level not to exceed 1" from the top rim of the bath
Water bath number of heaters three
Water bath drain port one
Water bath lifting Motorized + manual
Water bath maximum lifting distance 9 inches
Vacuum level < 3 torrs
Vacuum sealing PTFE + Viton gaskets
Vacuum connection 3/8" hose barb x 1
Safety Dry-run, over-temp shut-off, built-in circuit breakers
Unit/shipping dimensions (WxDxH) 52 x 30 x 92" (fully assembled) / 46 x 28 x 58" (Evaporator), 41 x 34 x 32" (glassware)
Shipping weight 525 Lbs

 

Included with SE130-S2

Part description Quantity
Ai 220V -30°C 40L capacity recirculating chiller 1 set
Welch 220V 2163 6.1 cfm 6 torr 8-head diaphragm pump and vacuum hose 1 set
Ai SolventVap 13-gallon rotary evaporator and water bath 1 set
Vertical main and auxiliary condensers, glass 2 sets
50L evaporating flask and 20L receiving flask 2 pcs
Three-way tee vapor buffering flask, glass 1 set
Glass vapor duct with seal (pre-installed) 1 set
PTFE vacuum sealing kit (pre-installed) 2 pcs
Receiving flask glass vacuum port with PTFE open/close valve, glass 2 pcs
Glass material feeding tube with PTFE open/close valve and PTEF extension tube 1 set
Stainless steel pole and mechanical vacuum gauge 2 pcs
Silicone vacuum tubing 10 ft
Rubber-wrapped support and bracket 4 pcs
Flask quick clamp with PTFE centering ring 6 sets
GL18 connector 5 sets
Evaporating flask cap spanner 1 pc
Allen key and inner hex screws 1 set
Ai 50L stainless steel 50L flask carrier / stand 1 pc
Ai plexiglass water bath cover for SolventVap 50L 1 pc
User's manual 1 pc