MultiDensity™ Filter Disks, 1.6μm

from $10.00

SKU DESCRIPTION DIAMETER PARTICLE RETENTION QUANTITY PRICE ADD TO CART
MD-160-6000 Multi-Density Filter Disks 2.1 cm 1.6 μm 10 Pack
$10
MD-160-6001 Multi-Density Filter Disks 2.4 cm 1.6 μm 10 Pack
$10
MD-160-6002 Multi-Density Filter Disks 2.5 cm 1.6 μm 10 Pack
$10
MD-160-6003 Multi-Density Filter Disks 3.5 cm 1.6 μm 10 Pack
$10
MD-160-6004 Multi-Density Filter Disks 3.7 cm 1.6 μm 10 Pack
$11
MD-160-6005 Multi-Density Filter Disks 4.25 cm 1.6 μm 10 Pack
$15
MD-160-6006 Multi-Density Filter Disks 4.7 cm 1.6 μm 10 Pack
$16
MD-160-6007 Multi-Density Filter Disks 5.5 cm 1.6 μm 10 Pack
$19
MD-160-6008 Multi-Density Filter Disks 7.0 cm 1.6 μm 5 Pack
$15
MD-160-6009 Multi-Density Filter Disks 9.0 cm 1.6 μm 5 Pack
$20
MD-160-6010 Multi-Density Filter Disks 11.0 cm 1.6 μm 5 Pack
$24
MD-160-6011 Multi-Density Filter Disks 12.5 cm 1.6 μm 5 Pack
$30.28
$28
MD-160-6012 Multi-Density Filter Disks 15.0 cm 1.6 μm 5 Pack
$44.70
$42
MD-160-6013 Multi-Density Filter Disks 18.5 cm 1.6 μm 5 Pack
$49.02
$47
MD-160-6014 Multi-Density Filter Disks 20.0 cm 1.6 μm 5 Pack
$51.91
$49
MD-160-6015 Multi-Density Filter Disks 22.0 cm 1.6 μm 5 Pack
$57.68
$54
MD-160-6016 Multi-Density Filter Disks 24.0 cm 1.6 μm 5 Pack
$64.89
$61
MD-160-6017 Multi-Density Filter Disks 27.0 cm 1.6 μm 5 Pack
$102.38
$97
MD-160-6018 Multi-Density Filter Disks 30.0 cm 1.6 μm 5 Pack
$115.36
$109

The Multi-Density Filter Disks have a final retention stage selection of <0.5μm to 2.7μm (the same as our binderless glass microfiber line of products). The unique filter has a robust prefilter built-in which captures particulate from >300μm and binds typically difficult to filter substances without clogging such as:

  • Lipids (natural oils and waxes)
  • Petrochemical oils, tars
  • Cellular matter
  • Proteins
  • Irregularly granular matter
  • Viscous suspensions and slurries

The filter has been optimized to meet the extreme demands of high fluidic volume:

  • Manifold vacuum filtration
  • Short path extraction methods
  • Positive pressure devices
  • Structured devices such as inline filters & capsules

The unique irregular and highly tortuous prefilter surface enables rapid drainage rates and reduces surface plugging. The flow and drainage rate is exceptionally rapid via its highly irregular surface formation which has high and low points that aid in the reduction of surface loading.

The unique fibers which sit on the outermost surface of the pre-filter side are designed to extend up and add further prefiltration structure similarly to glass floss. In standing solutions the prefilter side resists compaction causing surface plugging found in other common filter configurations.

The filter is free of binders, glues and resins which ensure a higher purity filtrate. These filters demonstrate very low extractables. This filter replaces multi pre-filtration stage products In applications where a series of prefilters are used to prepare sample prior to membrane filtration, saving time and reducing variability in extract signature upon analysis methods.

The borosilicate glass is highly resistive to aggressive solvents, acids* and base with a usable range of 0-14pH and a wide effective temperature range of -200 to 500 °C. **

*Borosilicate glass microfiber filters are not compatible with hydrofluoric acid.
**Borosilicate glass microfiber filters may become more brittle and susceptible to cracking at temperatures below -100°C.

Fluidic volume capacity to diameter relationship example in food sciences: H2O + 20% tomato paste solution homogenized, 1.5 μm final retention, 2-3bar vacuum, 15°C.

Documentation

Product Data Sheets
Multi-Density Information