Ai 100L Dual-Jacketed, 316L-Grade Stainless Steel Reactor
Image SKU Description Motor Type Collection Tank Quantity Price Add to Cart
products/sr100e_bin_62aec93c-f7a4-4c86-9cbf-c30b2b29290f.jpg
SR100.E.K10 100L Dual-Jacketed Stainless Steel Reactor Electric Stirring Motor (ETL, UL, CSA) Dual 10L 316L SST tanks w/ manifold 1 Kit
$21,990
$20,890
  • 1
  • 2
  • 3
  • 4
  • 5
Custom...
products/sr100e_k50_692a7ffb-0189-4eb4-b3ef-058fecabb186.jpg
SR100.E.K50 100L Dual-Jacketed Stainless Steel Reactor Electric Stirring Motor (ETL, UL, CSA) 50L 304 SST tank w/ dolly 1 Kit
$21,990
$20,890
  • 1
  • 2
  • 3
  • 4
  • 5
Custom...
products/sr100a_k100.jpg
SR100.E.K100 100L Dual-Jacketed Stainless Steel Reactor Electric Stirring Motor (ETL, UL, CSA) 100L 304 SST tank w/ dolly 1 Kit
$21,990
$20,890
  • 1
  • 2
  • 3
  • 4
  • 5
Custom...
products/sr100e_bin_a90dab09-39c4-4807-8f52-ad006efbfbf0.jpg
SR100.PR.K10 100L Dual-Jacketed Stainless Steel Reactor Pneumatic Stirring Motor (C1D1 peer review by PSI) Dual 10L 316L SST tanks w/ manifold 1 Kit
$31,980
$30,381
  • 1
  • 2
  • 3
  • 4
  • 5
Custom...
products/sr100e_k50_8a22f2e8-633a-4eb2-8eaa-0bcfe3a34a40.jpg
SR100.PR.K50 100L Dual-Jacketed Stainless Steel Reactor Pneumatic Stirring Motor (C1D1 peer review by PSI) 50L 304 SST tank w/ dolly 1 Kit
$31,980
$30,381
  • 1
  • 2
  • 3
  • 4
  • 5
Custom...
products/sr100a_k100_4543c0e5-f14b-49d0-ba85-a719c29199c8.jpg
SR100.PR.K100 100L Dual-Jacketed Stainless Steel Reactor Pneumatic Stirring Motor (C1D1 peer review by PSI) 100L 304 SST tank w/ dolly 1 Kit
$31,980
$30,381
  • 1
  • 2
  • 3
  • 4
  • 5
Custom...

Description

Ai 316L Grade Stainless Steel Reactor Features:

  • Dual jacketed. Sealed outer insulation jacket provides best temperature performance inside chamber
  • All wetted parts on main vessel and lid built with pharmaceutical grade 316L SST
  • Shell and tube heat exchanger with 70 tubes for the best condensing results
  • ElectroPolished internal chamber
  • Greatly reduces surface roughness by leveling micro-peaks and valleys
  • Improved vacuum pressures, out-gassing rates, and pumping speed
  • Prolong equipment lifespan by reducing friction and wear
  • Much better sterilized and semiconductor grade surface
  • Detachable condenser and collection tanks
  • Dual collection tanks with big sight glass allows you to drain without breaking vacuum
  • High drain port clearance for easy draining or added filtration
  • Large ports (top 12" bottom 6") allows easy chamber cleaning
  • Top placed vacuum port on condenser provides better flow and condensing results
  • No messy cable, with space saving integrated stirring motor controller
  • Heavy-duty stainless-steel frame with swivel casters
  • Built-in flashlight gives you a clear view inside the chamber
  • Positive/negative pressure gauge
  • Matte finish stainless steel
  • Customizable lid for various application
  • Tons of tri clamps adapters available, e.g. tri clamp to hose barb/KF25/NPT
  • Choice of bolted or pin clamp for various pressure applications
  • Flexible bellow condenser connection reduces shipping damage
  • Electric motor and controller model is ETL certified to UL and CSA standards (optional)
  • Peer reviewed model (pneumatic motor and controller) is approved to be used with Acetone, Ethanol, Heptane, Hexane, Isopropyl Alcohol, Methanol, and Pentane. (optional)

CAUTION!

  • Never fill circulated heaters or chillers with water, always use Ai or manufacturer's recommended thermal fluid
  • Always leave ample fluid space in heater reservoir to allow fluid heat expansion
  • Always keep system vacuum passage or drain valve open when heating up circulation jackets
  • Always make sure your vacuum pumps and diffusion pump fluid is clean and within limits
Model SR100
Electric Stirring Motor (optional) 220V, 50/60Hz, 1~Phase, 200 watts, 1/4 HP
Rotation: 450 rpm max. (±8%)
Starting torque: 3.0 N.m
Rated toruqe: 1.54 N.m
Built-in gearbox ratio: 3:1 to 180:1
Controller: Delta, UL listed
Pneumatic Stirring Motor (optional) Power: 1/4 HP
Rotation: 450 rpm max. (±8%)
Compressed air pressure range: 30 to 80 psi (0.2 to 0.55 MPa)
Working temperature: -10C to +70C
For constant use: set rpm to 80% of maximum rpm
Motor lubricant: Daphne Eponex EP-No. 1; Check/replenish/replace every 500 hours
Air lubricant Type: JIS K2213-1 (ISOVG32); Recommended products: Shell Vitrea Oil 32, JOMO Turbine 32, COSMO Turbine 32; Speed: 2-3 drops per minute
For safety purpose, detach compressed air supply when not in use, left un-attended or at night
Do not run motor un-loaded
Set Air Adjuster to minimum at initial run, make sure motor is working properly, before increasing CFM
Before inspecting unit, stop the motor and detach air supply. Do NOT inspect unit when motor is in action.
Make sure exhaust port/hole is clear from any debris or blockage
Check every 2-3 days: Air Lubricant, Air Filter water drain
Port Configuration Lid: 12" triclamp
Center motor port: 3" triclamp
Drain port: 6" triclamp
Drain port on/off valve: 2" triclamp
Vacuum port: 1.5" triclamp
Condenser recirculating fluid port: 1/2" female NPT
Vessel jacket recirculating fluid ports: 1" female NPT
50L/100L collection tank lid: 6" tri-clamp, with 1.5" tri-clamp x 4
Main Vessel Volume: 100L (min. fill volume 25L)
Material: 316L grade stainless steel
Interior finish: ElectroPolished
Agitator Structure: propeller, 3-blade, dual-layer (standard)
Material: 316L grade stainless steel
Detachable length: 20 inches
Center Fluid Jacket Volume: 22L
Material: 304 grade stainless steel
Outer Insulation Jacket Sealed
Material: 304 grade stainless steel
Collection Tank Option 1: 10L x 2, 316L stainless steel, with manifold
Option 2: 50L x 1, 304 stainless steel, with dolly (15.5" diameter, 23.5" height, 30" with dolly)
Option 3: 100L x 1, 304 stainless steel, with dolly (15.5" diameter, 43" height, 49.5" with dolly)
Material All wetted parts 316L grade stainless steel on main reactor body; Rest of reactor in 304 grade stainless steel, including motor coupling, triclamps, temp/pressure gauge adapters, and chassis.
Main Condenser Style: shell and tube heat exchanger
Number of tubes: 70
Condensing area: 0.89 m2
Pressure Ultimate vacuum level: 1 Torr
Temperature Range -55°C to +250°C (-67°F to +482°F)
Temperature Sensor/Display Regular: BOOST.TTA.0101, -200C to 480C, 50.5 clamp
Explosion proof: BOOST.TTA.0102, -200C to 480C, 50.5 clamp
Sealing Gasket Food grade Viton
Main Mounting Frame Heavy duty 2 x 2" 304 grade stainless steel, mounted on four casters
Drain Port Ground Clearance Drain port: 19.5 inches
Drain valve: 14 inches
Unit/Shipping Weight 255 lbs / 350 lbs
Unit/Shipping Dimensions 38 x 32 x 82" (W x D x H)
Compliance ETL tested to UL and CSA standards
C1D1 peer review by PSI (optional)

Related Products