Ai SolventVap 5L Rotary Evaporator, Turnkey, with Ai C30 Chiller and ULVAC Pump
SKU Description Quantity Price Add to Cart
SE13-C30-DTC41 Ai SolventVap TurnKey 5L Rotary Evaporator with Ai C30 Chiller and ULVAC Pump, UL/CSA Certified 1 Kit $10,585
  • 1
  • 2
  • 3
  • 4
  • 5
Custom...

Description

Ai SolventVap 1.3-gallon/5L (evaporating flask capacity) series rotary evaporators come with all PTFE valves for solvent-resistant operations. Also come with them are vertical glassware and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely efficiently. Thats why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap is the safety features, which includes dry-run protection, water bath over-temperature shut-off protection, and fuse protection.

Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.

Digital water bath operates from ambient temperature to 99C (210F) with PID temperature control stepping at 0.1C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power, should the controller fail.

Standard Glassware Set includes 1.32 gallon (5 liters) round-bottomed evaporating flask, 0.79 gallon (3 liters) round-bottomed receiving flask, and vertical condenser. Rotary evaporators with vertical glass condenser for are great for distillation of solvents with higher boiling points.

Features

  • Solvent-resistant PTFE and Viton gaskets, ensuring long time operation.
  • Water bath cover enhances safety by protecting evaporating flask and the material inside; it provides you even temperature inside evaporation flask as well as energy saving by reducing heat loss. It also creates a better lab environment by preventing heat and humidity from escaping.
  • Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation.
  • Downward-condensing vacuum connection design ensures safe vacuum operation.
  • Motorized water bath lifting for precise control.
  • Easy, straight-forward visual operation with digital speed and temperature display.
  • PID temperature controller ensures accurate temperature control is maintained.
  • One year warranty on rotary evaporator (doesn't include glassware or sealing gaskets).

Warning

Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Specifications

Specification SE13-C30-DTC41
Electrical requirements 220V 50/60Hz single phase, 2300 watts (rotation motor: 300 watts)
Glass material High borosilicate glass 3.3
Evaporating flask capacity 1.32 gallon (5 liters)
Evaporating flask max load Not to exceed 60% of the flask's capacity
Evaporating flask sealing flange 2" diameter
Evaporating flask rotation speed 10 to 140 rpm
Evaporating flask evaporating speed 0.5 gallon/hour (water), 1 gallon/hour (alcohol)
Receiving flask capacity 0.79 gallon (3 liter)
Condenser glassware Dual-circulating coils, vertical
Condenser chilling fluid connection 3/8" hose barb x 2
Condensing surface 2,780 cm2 or 3 sq ft
Working environment 5 to 95°F
Water bath temperature range ambient to 99°C (210°F)
Water bath temperature controller digital
Water bath dimensions 11.4" diameter x 6.7" depth x 9" height
Water bath material stainless steel
Water bath media distilled water only
Water bath max water level not to exceed 1" from the top rim of the bath
Water bath number of heaters one
Water bath drain port one
Water bath lifting Motorized
Water bath maximum lifting distance 4 inches
Vacuum level < 3 torrs
Vacuum sealing PTFE + Viton gaskets
Vacuum connection 3/8" hose barb x 1
Safety Dry-run, over-temp shut-off, built-in circuit breakers
Unit/shipping dimensions (WxDxH) 30 x 15.7 x 42" / 29 x 17 x 35" (evaporator), 22 x 22 x 22" (glassware) (WxDxH)
Shipping weight 105 Lb (evaporator), 57 Lb (glassware)
Certification ETL tested to UL and CSA standards

 

Package includes

Part description Quantity
Ai 110V SolventVap 1.3-gallon rotary evaporator and water bath 1 each
Ai 220V C30-10 -30°C/-22°F 10L capacity recirculating chiller & fitting 1 each
ULVAC 220V 1.6 cfm 7.5 torr 2-stage PTFE diaphragm pump & fitting 1 each
Vertical condenser with 2 chilling water ports and 1 vacuum port, glass 1 each
1.32G/5L round shaped rotating evaporating flask, glass 1 each
3L receiving flask with detachable drain port 1 each
Three-way tee vapor buffering flask, glass 1 each
Glass receiving flask & condenser connector elbow with PTFE open/close switch 1 set
Receiving flask glass vacuum port with PTFE open/close valve 1 each
Glass material feeding port with PTFE open/close valve 1 set
Glass vapor duct with seal (pre-installed) 2 each
PTFE vacuum sealing kit (pre-installed) 2 pcs
PTFE extension feeding hose 1 pcs
Stainless steel pole and mechanical vacuum gauge 2 pcs
Silicone vacuum tubing 10 ft
Rubber-wrapped condenser and receiving flask support and bracket 3 pcs
Flask quick clamp (4 smaller pcs for condenser, receiving flask and feeder, 1 larger pc for 3-way flask) & centering ring 6 sets
GL14 connector 3 pieces
Allen key and backup inner hex screws 1 set
Ai plexiglass water bath cover for SolventVap 5L 1 each
User's manual 1 pc

Related Products