Ai SolventVap 2L Rotary Evaporator, Vertical Dry-Ice Condenser, Manual Lift
SKU Description Capacity Electrical Quantity Price Add to Cart
SE05C.110 Ai SolventVap Rotary Evaporator, Manual Lift 2 L 110V 60Hz single phase, 9.8A, 1075 watts, UL/CSA Certified 1 Each
$3,190
$2,938
  • 1
  • 2
  • 3
  • 4
  • 5
Custom...

Description

Ai SolventVap 0.5-gallon/2L (evaporating flask capacity) series rotary evaporators come with a modular heating bath, vertical glassware, and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. That’s why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap is the safety features, which includes dry-run protection, water bath over-temperature shut-off protection, and fuse protection.

Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.

Digital water bath operates from ambient temperature to 99°C (210°F) with PID temperature control stepping at 0.1°C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power, should the controller fail.

Standard Glassware Set 0.13 gallon (0.5L), 0.26 gallon (1L) or 0.53 gallon (2 liters) pear shaped evaporating flask, 0.26 gallon (1 liter) round-bottomed receiving flask, and vertical cold trap condenser. Rotary evaporators with vertical condenser are great for distillation of solvents with higher boiling points.

Features

  • UL 61010-1 and CSA C22.2 certified, standard
  • No chiller needed, utilizes dry ice for optimal efficiency.
  • Solvent-resistant PTFE and Viton gaskets ensuring long time operation.
  • Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation.
  • Downward-condensing vacuum connection design ensures safe vacuum operation.
  • Modular design (individual rotary and water bath modules) for easy future upgrades.
  • Easy multi-level manual lift with secure lock for the evaporating flask.
  • Easy, straight-forward visual operation with digital speed and temperature display.
  • PID temperature controller ensures accurate temperature control is maintained.

Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Specifications

Specifications
Glass Material High borosilicate glass 3.3
Evaporating Flask Capacity 2 Liters (0.53 gallon)
Maximum Load Not to exceed 60% of the flask's capacity
Rotation Speed 10 to 180 rpm
Evaporating Speed 20mL per minute
Receiving Flask 1 Liter (0.26 gallon)
Condenser Glassware Vertical cold trap (dry ice) condenser with lid
Chilling Fluid Connection 3/8" hose barb x 2
Vacuum Connection 3/8" hose barb x 1
Condensing Surface 1,260 cm2 or 1.4 sq ft
Working Environment 5 to 95°F
Water Bath Temperature Range ambient to 99°C (210°F)
Temperature Controller digital
Capacity 2 gallons
Dimensions 10" diameter x 5" depth x 9.75" height
Material stainless steel
Media distilled water only
Max. Water Level not to exceed 1" from the top rim of the bath
Number of Heaters one
Lifting Weight balancing manual control with lock
Maximum Lifting Distance 4 inches (extendable to 10 inches)
Vacuum Ultimate Vacuum Level < 3 torrs
Sealing PTFE + Viton gaskets
Connection 3/8" hose barb x 1 (on condenser)
Safety Dry-run, over-temp shut-off, fuse protections
Unit Dimensions (WxDxH) 22 x 12.5 x 26"
Shipping Dimensions (WxDxH) 24 x 24 x 29"
Shipping Weight 40 lbs
Electrical Requirements 110V 60Hz single phase, 9.8A, 1075 watts (heater: 1050 watts, rotation motor: 25 watts)
Compliance UL/CSA

Package includes:

Package Includes
Description Quantity
Ai SolventVap 2 Liter rotary evaporator and water bath 1 Each
Vertical cold trap condenser with 1 vacuum port & lid, glass 1 Each
2L pear shaped evaporating flask, glass 1 Each
1L round shaped receiving flask, glass 1 Each
Glass vapor duct with seal 1 Set
Material feeding tube with valve, glass 1 Each
PTFE extension feeding hose 1 Each
PTFE vacuum sealing kit 1 Set
Condenser cap kit 2 Each
Glass shaft cap and evaporator flask quick-release 2 Each
Condenser support and bracket 1 Each
Condenser support securing screw 1 Each
Receiving flask ball joint clamp 1 Each
GL14 connector 1 Each
Phillips screw driver 1 Each
Mechanical vacuum gauge 1 Each
3-prong 110V US power cord for evaporator 1 Each

Documentation

Related Products