|SKU||Description||Capacity||Electrical||Quantity||Price||Add to Cart|
|SE13C.110||Ai SolventVap Rotary Evaporator, Motorized Lift||5 L||110V 60Hz single phase, 2300 watts, 21A, UL/CSA Certified||1 Each||
|SE13C-CE.110||Ai SolventVap Rotary Evaporator, Motorized Lift||5 L||110V 60Hz single phase, 2300 watts, 21A, UL/CSA/CE Certified||1 Each||
|SE13C.220||Ai SolventVap Rotary Evaporator, Motorized Lift||5 L||220V 50/60Hz single phase, 2300 watts, 10.5A, UL/CSA Certified||1 Each||
|SE13C-CE.220||Ai SolventVap Rotary Evaporator, Motorized Lift||5 L||220V 50/60Hz single phase, 2300 watts, 10.5A, UL/CSA/CE Certified||1 Each||
Ai SolventVap 5L series rotary evaporators is now ETL tested to UL/CSA standards. This certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. SolventVap come with all PTFE valves for solvent-resistant operations. Also come with them are vertical glassware and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. That’s why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap is the safety features, which includes dry-run protection, water bath over-temperature shut-off protection, and fuse protection.
Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.
Digital water bath operates from ambient temperature to 99°C (210°F) with PID temperature control stepping at 0.1°C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power, should the controller fail.
Standard Glassware Set includes 1.32 gallon (5 liters) round-bottomed evaporating flask, 0.79 gallon (3 liters) round-bottomed receiving flask, and vertical cold trap condenser. Rotary evaporators with vertical condenser for are great for distillation of solvents with higher boiling points.
- UL 61010-1 and CSA C22.2 certified, standard. CE certification optional.
- No chiller needed, utilizes dry ice for optimal efficiency.
- Water bath cover gives you uniform temperature inside evaporation flask as well as energy saving by reducing heat loss. It also creates a better lab environment by preventing heat and humidity from escaping.
- Solvent-resistant PTFE and Viton gaskets, ensuring long time operation.
- Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation.
- Downward-condensing vacuum connection design ensures safe vacuum operation.
- Motorized water bath lifting for precise control.
- Easy, straight-forward visual operation with digital speed and temperature display.
- PID temperature controller ensures accurate temperature control is maintained.
- One year warranty on rotary evaporator except for glassware and all sealing gaskets.
Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.
|Glass Material||High borosilicate glass 3.3|
|Evaporating Flask||Capacity||5 Liters (1.32 gallons)|
|Maximum Load||Not to exceed 60% of the flask's capacity|
|Rotation Speed||10 to 140 rpm|
|Evaporating Speed||0.5 gallon/hour (water), 1 gallon/hour (alcohol)|
|Receiving Flask||3 Liter (0.79 gallon)|
|Condenser||Glassware||Vertical cold trap (dry ice) condenser with lid|
|Vacuum Connection||3/8" hose barb x 1|
|Condensing Surface||2,780 cm2 or 3 sq ft|
|Working Environment||5 to 95°F|
|Water Bath||Temperature Range||ambient to 99°C (210°F)|
|Dimensions||11.4" diameter x 6.7" depth x 9" height|
|Media||distilled water only|
|Max. Water Level||not to exceed 1" from the top rim of the bath|
|Number of Heaters||one|
|Maximum Lifting Distance||4 inches|
|Vacuum||Ultimate Vacuum Level||< 3 torrs|
|Sealing||PTFE + Viton gaskets|
|Connection||3/8" hose barb x 1|
|Safety||Dry-run, over-temp shut-off, fuse protections|
|Unit Dimensions (WxDxH)||30 x 15.7 x 42"|
|Shipping Dimensions (WxDxH)||29 x 17 x 35" (evaporator), 22 x 22 x 22" (glassware)|
|Shipping Weight||105 lbs (evaporator) 57 lbs (glassware)|
|Electrical Requirements||110V 60Hz single phase, 2300 watts, 21A or 220V 50/60Hz single phase, 2300 watts, 10.5A|
|Ai SolventVap 5 Liter rotary evaporator and water bath||1 Each|
|Vertical cold trap condenser with 1 vacuum port and lid, glass||1 Each|
|1.32G/5L round shaped rotating evaporating flask, glass||1 Each|
|3L receiving flask with detachable drain port||1 Each|
|Three-way tee vapor buffering flask, glass||1 Each|
|Glass receiving flask & condenser connector elbow with PTFE open/close switch||1 Set|
|Receiving flask glass vacuum port with PTFE open/close valve||1 Set|
|Glass material feeding port with PTFE open/close valve||1 Set|
|Glass vapor duct and PTFE vacuum seal kit (pre-installed)||1 Set|
|PTFE extension feeding hose||1 Set|
|Stainless steel pole and mechanical vacuum gauge with 2 hose barb connection||1 Each|
|Rubber-wrapped condenser and receiving flask support and bracket||3 Each|
|Flask quick clamp (4 smaller pcs for condenser, receiving flask and feeder, 1 larger pc for 3-way flask) & centering ring||6 Sets|
|GL14 connector||1 Each|
|Allen key and backup inner hex screws||4 Each|
|Ai plexiglass water bath cover for SolventVap 5L||1 Each|